top of page

Absorption Spectroscopic Methods

D8274-20a Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer 
 

D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method) 
 

D8383-21 Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy 
 

D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy 
 

D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy (Withdrawn 2013) 
 

D5292-99(2014) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy (Withdrawn 2018) 
 

D1840-07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry 
 

D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption 
 

D2008-12(2018) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products 
 

D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and  tert-Butanol in Gasoline by Infrared Spectroscopy 
 

D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy 
 

D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) 
 

D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14

Additives and Electrical Properties

D5006-11(2021) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels 

D7618-13(2021) Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel 

D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter 

D5001-19e1 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) 

D4306-20 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination 

D4865-19 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems 

D2624-21a Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels 

D4054-22 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives 

D4171-22 Standard Specification for Fuel System Icing Inhibitors 

Analysis of Liquid Fuels and Lubricants

D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method 

D6304-20 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration 

D1093-11(2017) Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues 

D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method) 

D892-18 Standard Test Method for Foaming Characteristics of Lubricating Oils 

D94-07(2017) Standard Test Methods for Saponification Number of Petroleum Products 

D1159-07(2017) Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration 

D2273-08(2016) Standard Test Method for Trace Sediment in Lubricating Oils 

D524-15(2019) Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products 

D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration 

D3242-11(2017) Standard Test Method for Acidity in Aviation Turbine Fuel 

D974-21 Standard Test Method for Acid and Base Number by Color-Indicator Titration 

D91-02(2019) Standard Test Method for Precipitation Number of Lubricating Oils 

D2982-07(2019) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils 

D189-06(2019) Standard Test Method for Conradson Carbon Residue of Petroleum Products 

D6082-12(2017) Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils 

D4739-17 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration 

D893-14(2018) Standard Test Method for Insolubles in Used Lubricating Oils 

D7923-19 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration 

D5984-11(2017) Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration 

D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method 

D5770-11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing 

D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

 

D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products 

D2710-20 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration 

D322-97(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation 

D8045-17e1 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration 

D4055-04(2019) Standard Test Method for Pentane Insolubles by Membrane Filtration 

D565-99(2019) Standard Test Method for Carbonizable Substances in White Mineral Oil 

D3607-08(2016) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping 

D7317-07(2019) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) 

D483-04(2018) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils 

D3339-21 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration 

D8126-21 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration 

D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration 

D7795-15(2022)e1 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

Automotive Gear Lubricants & Fluids

D5662-19a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomer

D5760-19 Standard Specification for Performance of Manual Transmission Gear Lubricants 

D4998-13(2021) Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids 

D5704-22 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles 

D5579-19e1 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test 

D6121-19ae1 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles 

D7452-19e1 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading 

D8165-22 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions 

Automotive Greases

D4950-19 Standard Classification and Specification for Automotive Service Greases 

Automotive Lubricants

D7484-21b Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine 

D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography 

D7156-19 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine 

D4485-20 Standard Specification for Performance of Active API Service Category Engine Oils 

D7549-21 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure 

D7450-19 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service 

D4858-13 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines (Withdrawn 2022) 

D3524-14(2020) Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography 

D4857-12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021) 

D4863-13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022) 

D4859-13 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC (Withdrawn 2022) 

D6923-18 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure 

D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils 

F118-13 Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022) 

D6987/D6987M-13a Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022) 

D7422-22 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine 

D8074-22 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine 

D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time 

D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time 

D6891-21e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine 

D8047-19e1 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine 

D8048-21ae1 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine 

D8111-21ae1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine 

D8291-21ae1 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine 

D7038-22a Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants 

D7468-22 Standard Test Method for Cummins ISM Test 

D8350-22 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine 

D8279-22a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine 

Aviation Fuels

D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures) 

Aviation Piston Engine Fuels

D7960-21 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components 

D7547-21 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline 

D910-21 Standard Specification for Leaded Aviation Gasolines 

D7719-21a Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel 

D7592-15a Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel (Withdrawn 2016) 

D6812-04a(2019) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines 

D8147-17 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines 

D6227-18 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component 

D6424-04a(2019) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines 

D7826-21 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives 

D8434-21 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive

Burner, Diesel and Non-Aviation Gas Turbine Fuels

PS121-99 Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels 

D2156-09(2018) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels 

D396-21 Standard Specification for Fuel Oils 

D4418-17 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines 

D7688-18 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation 

D6079-18 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) 

D6751-20a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels 

D6078-04(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021) 

D187-18 Standard Test Method for Burning Quality of Kerosene 

D6898-03(2016) Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig (Withdrawn 2021) 

D3699-19 Standard Specification for Kerosine 

D8181-19 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils 

D2880-20 Standard Specification for Gas Turbine Fuel Oils 

D6985-04a Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010) 

D7467-20a Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) 

D2157-18 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels 

D7544-12(2017) Standard Specification for Pyrolysis Liquid Biofuel 

D976-21 Standard Test Method for Calculated Cetane Index of Distillate Fuels 

D4737-21 Standard Test Method for Calculated Cetane Index by Four Variable Equation 

D975-22 Standard Specification for Diesel Fuel 

C4 and C5 Hydrocarbons​

D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography 

D7423-17 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection 

D1157-91(2019) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons 

D4423-10(2015) Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons 

D2384-19 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures 

D5799-19 Standard Test Method for Determination of Peroxides in Butadiene 

D5274-00(2019) Standard Guide for Analysis of 1,3–Butadiene Product 

D2593-19 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography 

D1025-10(2021) Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene 

D2426-19 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography 

Chemical and General Laboratory Tests

D6185-11(2017) Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases 

D128-98(2019) Standard Test Methods for Analysis of Lubricating Grease 

D1404/D1404M-99(2019) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease 

D4289-21 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids 

D4048-22 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease 

Chemistry for the Evaluation of In-Service Lubricants

D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing 

D8304-19 Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids 

D7899-19 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method 

D7546-15 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor 

D7593-14 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography 

Chromatographic Distribution Methods

D7798-20 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC) 

D7169-20e1 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography 

D3710-95(2009) Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography 

D5307-97(2007) Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography (Withdrawn 2011) 

D7096-19 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography 

D7500-15(2019) Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography 

D7807-20 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection 

D7213-15(2019) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography 

D6417-15(2019) Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography 

D5480-95(1999)e1 Standard Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003) 

D6352-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography 

D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography 

D7398-21 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography 

D2887-22 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography 

Combustion and Thermal Properties

D3241-20c Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels 

D7739-11(2020) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance 

D1740-01 Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels (Withdrawn 2006) 

D1322-22 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel 

Combustion Characteristics​

D6890-21 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber 

D7668-17 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method 

D613-18ae1 Standard Test Method for Cetane Number of Diesel Fuel Oil 

D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique 

D7170-16 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019) 

D909-22 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline 

D8183-22 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method 

D2699-22 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel 

D2700-22a Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel 

Consistency and Related Rheological Tests

D1403-20b Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment 

D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test) 

D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases 

D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test) 

D217-21a Standard Test Methods for Cone Penetration of Lubricating Grease 

D1831-21 Standard Test Method for Roll Stability of Lubricating Grease 

Coordinating Subcommittee on Quality Assurance and Statistics

D3244-21a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications 

D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material 

D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results 

D6259-15(2019) Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method 

D6300-21 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants 

D6708-21 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 

D8146-18 Standard Guide for Evaluating Test Method Capability and Fitness for Use 

D8428-21 Standard Guide for Establishing Analyst Competence to Perform a Test Method 

 

D7915-22 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set 

 

D6299-22 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 

D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 

D6792-22 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories 

Coordinating Subcommittee on Thermometry

D7962-21 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift 

 

D8164-21 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing 

Correlative Methods

D3343-16 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels 

D2501-14(2019) Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils 

D2890-92(2018) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels 

D7215-16 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels 

D2889-95(2019) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels 

D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements 

D3238-22 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method 

Corrosion and Water/Air Separability

D3603-20 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) 

D3427-19 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils 

D665-19 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water 

Corrosion Testing of Sheet Metal Processing Fluids

D1748-22 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet 

Development and Surveillance of Bench Tests Methods

D7563-10(2016) Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel 

D4682-18 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants 

D7216-22 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers 

D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus 

Elemental Analysis

D7740-20 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants 

D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy 

D8056-18 Standard Guide for Elemental Analysis of Crude Oil 

D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy 

D6728-16(2021) Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry 

D7041-16(2021) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection 

D1552-16(2021) Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD) 

D7111-16(2021) Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D7751-16(2021) Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis 

D4045-19 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry 

D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction 

D3231-18 Standard Test Method for Phosphorus in Gasoline 

D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy 

D3701-17 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry 

D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009) 

D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence 

D7318-19e1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration 

D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method) 

D4629-17 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection 

D6481-14(2019) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy 

D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method 

D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (Withdrawn 2016) 

D6334-12(2017)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence 

D4808-17 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy 

D3227-16 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) 

D3341-16 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method 

D3228-20 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method 

D482-19 Standard Test Method for Ash from Petroleum Products 

D7757-17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry 

D5762-18a Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence 

D874-13a(2018) Standard Test Method for Sulfated Ash from Lubricating Oils and Additives 

D4628-16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry 

D7220-12(2017) Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry 

D7039-15a(2020) Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry 

D129-18 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) 

D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry 

D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D3246-15 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry 

D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography 

D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 

D4952-12(2017) Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) 

D808-16 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021) 

D7171-20 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy 

D7876-13(2018) Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants 

D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) 

D5708-15(2020)e1 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry 

D1018-11(2016) Standard Test Method for Hydrogen In Petroleum Fractions (Withdrawn 2021) 

D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy 

D6470-99(2020) Standard Test Method for Salt in Crude Oils (Potentiometric Method) 

D1318-16 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) 

D7482-17 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis 

D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence 

D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry 

D7040-04(2020) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 

D7578-20 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants 

D5384-14(2019) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method) 

D4047-18 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method 

D8322-20 Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES) 

D6920-13 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018) 

C1234-11(2019) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations 

D3340-07 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (Withdrawn 2013) 

D7260-20 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants 

D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants 

D5761-96(2017) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials 

D7303-17 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry 

D3348-12(2017) Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022) 

D8315-20 Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry 

D8252-19e1 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry 

D1091-11(2016) Standard Test Methods for Phosphorus in Lubricating Oils and Additives (Withdrawn 2021) 

D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) 

D4046-14(2019) Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019) 

D6443-14(2019)e1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure) 

D5622-17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis 

D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection 

D6732-04(2020) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry 

D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants 

D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter 

D8127-17e1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants 

D1839-14(2019) Standard Test Method for Amyl Nitrate in Diesel Fuels (Withdrawn 2019) 

D7455-19 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis 

D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants 

D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry 

D2622-21 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry 

D8351-22 Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES) 

D5056-22 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption 

D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry 

 

D5600-22 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D6595-22 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry 

D3605-22 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy 

D7319-22 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography 

D7328-22 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection 

D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil 

Emerging Turbine Fuels

D7566-22 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

Coordinating Subcommittee on Quality Assurance and Statistics

D3244-21a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications 

D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material 

D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results 

D6259-15(2019) Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method 

D6300-21 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants 

D6708-21 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 

D8146-18 Standard Guide for Evaluating Test Method Capability and Fitness for Use 

D8428-21 Standard Guide for Establishing Analyst Competence to Perform a Test Method 

 

D7915-22 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set 

 

D6299-22 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 

D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 

D6792-22 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories 

Coordinating Subcommittee on Thermometry

D7962-21 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift 

 

D8164-21 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing 

Correlative Methods

D3343-16 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels 

D2501-14(2019) Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils 

D2890-92(2018) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels 

D7215-16 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels 

D2889-95(2019) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels 

D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements 

D3238-22 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method 

Corrosion and Water/Air Separability

D3603-20 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) 

D3427-19 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils 

D665-19 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water 

Corrosion Testing of Sheet Metal Processing Fluids

D1748-22 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet 

Development and Surveillance of Bench Tests Methods

D7563-10(2016) Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel 

D4682-18 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants 

D7216-22 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers 

D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus 

Elemental Analysis

D7740-20 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants 

D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy 

D8056-18 Standard Guide for Elemental Analysis of Crude Oil 

D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy 

D6728-16(2021) Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry 

D7041-16(2021) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection 

D1552-16(2021) Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD) 

D7111-16(2021) Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D7751-16(2021) Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis 

D4045-19 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry 

D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction 

D3231-18 Standard Test Method for Phosphorus in Gasoline 

D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy 

D3701-17 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry 

D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009) 

D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence 

D7318-19e1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration 

D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method) 

D4629-17 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection 

D6481-14(2019) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy 

D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method 

D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (Withdrawn 2016) 

D6334-12(2017)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence 

D4808-17 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy 

D3227-16 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) 

D3341-16 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method 

D3228-20 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method 

D482-19 Standard Test Method for Ash from Petroleum Products 

D7757-17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry 

D5762-18a Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence 

D874-13a(2018) Standard Test Method for Sulfated Ash from Lubricating Oils and Additives 

D4628-16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry 

D7220-12(2017) Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry 

D7039-15a(2020) Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry 

D129-18 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) 

D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry 

D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D3246-15 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry 

D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography 

D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 

D4952-12(2017) Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) 

D808-16 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021) 

D7171-20 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy 

D7876-13(2018) Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants 

D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) 

D5708-15(2020)e1 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry 

D1018-11(2016) Standard Test Method for Hydrogen In Petroleum Fractions (Withdrawn 2021) 

D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy 

D6470-99(2020) Standard Test Method for Salt in Crude Oils (Potentiometric Method) 

D1318-16 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) 

D7482-17 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis 

D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence 

D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry 

D7040-04(2020) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 

D7578-20 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants 

D5384-14(2019) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method) 

D4047-18 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method 

D8322-20 Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES) 

D6920-13 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018) 

C1234-11(2019) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations 

D3340-07 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (Withdrawn 2013) 

D7260-20 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants 

D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants 

D5761-96(2017) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials 

D7303-17 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry 

D3348-12(2017) Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022) 

D8315-20 Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry 

D8252-19e1 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry 

D1091-11(2016) Standard Test Methods for Phosphorus in Lubricating Oils and Additives (Withdrawn 2021) 

D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) 

D4046-14(2019) Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019) 

D6443-14(2019)e1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure) 

D5622-17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis 

D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection 

D6732-04(2020) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry 

D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants 

D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter 

D8127-17e1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants 

D1839-14(2019) Standard Test Method for Amyl Nitrate in Diesel Fuels (Withdrawn 2019) 

D7455-19 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis 

D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants 

D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry 

D2622-21 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry 

D8351-22 Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES) 

D5056-22 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption 

D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry 

 

D5600-22 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) 

D6595-22 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry 

D3605-22 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy 

D7319-22 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography 

D7328-22 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection 

D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil 

Emerging Turbine Fuels

D7566-22 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

FTIR Testing Practices and Techniques Related to In-Service Lubricants

D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy 

E2412-10(2018) Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry 

D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument 

D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry 

D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation 

D7412-22 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry 

D7414-22 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry 

D7415-22 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry 

D7418-22 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring 

D7624-22 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry 

Fuel Cleanliness

D3948-20 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer 

D1094-07(2019) Standard Test Method for Water Reaction of Aviation Fuels 

D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration 

D7224-20 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer 

D8194-18e1 Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels 

D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method 

D7959-19 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip 

D8290-20 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy 

D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (Withdrawn 2014) 

D8073-22 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument 

D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling 

D3240-22a Standard Test Method for Undissolved Water In Aviation Turbine Fuels 

Functional Tests - Contamination

D4049-20 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray 

D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases 

D6138-19 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test) 

D5969-21 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments 

D1743-22 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases 

Functional Tests - Temperature

D3336-20b Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures 

D4290-20 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions 

D1478-20 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease 

D1263-94(2005)e1 Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases (Withdrawn 2010) 

D3527-21 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease 

 

Functional Tests - Tribology

D5706-16 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine 

D5707-19 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine 

D7594-19 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine 

D2266-01(2015) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method) 

D2509-20ae1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method) 

D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) 

D3704-96(2017) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion 

D4170-16 Standard Test Method for Fretting Wear Protection by Lubricating Greases 

Gas Chromatography Methods

D7875-20 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography 

D7974-21 Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography 

D6729-20 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography 

 

D7920-21 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography 

D6730-21 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography 

D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV) 

D6733-01(2020) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography 

D8071-21 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) 

D5623-19 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection 

D2427-06(2019) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography 

D5580-21 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene,  p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography 

D6839-21a Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography 

D5443-14(2018) Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography 

D7900-18e1 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography 

D5501-20 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography 

D6293-98(2003)e1 Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography (Withdrawn 2009) 

D4420-94(1999)e1 Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography (Withdrawn 2004) 

D4626-95(2019) Standard Practice for Calculation of Gas Chromatographic Response Factors 

D7754-19 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography 

D8144-18e1 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography 

D6623-01 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography 

D8003-15a(2021) Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography 

D7576-16 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022) 

D5986-96(2019) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy 

D8267-19a Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) 

D7753-12(2020) Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography 

D7922-21 Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography 

D4291-21 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil 

D2268-21 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography 

D5441-21 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography 

D5134-21 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography 

D6160-21 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography 

D7059-21 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography 

D7796-21 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography 

D6584-21 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography 

D8368-22 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV) 

D4815-22 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4Alcohols in Gasoline by Gas Chromatography 

D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection 

D8396-22 Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID 

D6296-22 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography 

 

D3606-22 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography

Gasoline and Gasoline-Oxygenate Blends

D8076-21b Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines 

D5598-20 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling 

D6422-99 Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends (Withdrawn 2007) 

D6421-20 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure 

D6201-19a Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation 

D5500-20a Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation 

D4814-21c Standard Specification for Automotive Spark-Ignition Engine Fuel 

D8275-22 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines 

Gasoline and Oxygenated Fuels

D7862-21 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel 

D8011-19 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol 

Guidelines for In-Services Lubricants Analysis

D7720-21 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination 

D7669-20 Standard Guide for Practical Lubricant Condition Data Trend Analysis 

D7973-19 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings 

D7718-11(2019) Standard Practice for Obtaining In-Service Samples of Lubricating Grease 

D8128-22 Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings 

D7874-13(2022) Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing 

Heavy Duty Engine Oils

D5967-21 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine 

D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine (Withdrawn 2022) 

D6618-16 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine 

D6681-17 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure 

D6838-04(2010) Standard Test Method for Cummins M11 High Soot Test (Withdrawn 2019) 

D6975-04(2010) Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019) 

D5862-09 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009) 

D6483-04 Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) 

D5966-22 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine 

D5968-19ae1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C 

D6594-20e1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C 

D6750-19e1 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur) 

Hydraulic Fluids

D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method) 

D6547-16 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple 

D5306-92(2018) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids 

D6546-15 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications 

D7752-18 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids 

D5534-94(2018) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids 

D8277-20 Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique 

D7044-15 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids 

D4174-17 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems 

D6158-18 Standard Specification for Mineral Hydraulic Oils 

D6080-18a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids 

D2070-16e1 Standard Test Method for Thermal Stability of Hydraulic Oils 

D4898-16 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis 

D6046-18 Standard Classification of Hydraulic Fluids for Environmental Impact 

D2155-18 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature 

D8029-18 Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids 

D7043-21 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump 

D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids 

D8385-22 Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique 

D6973-14(2019)e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump 

D7721-22 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency 

Hydrocarbon Analysis

D8302-20 Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography 

Hydrocarbon Measurement for Custody Transfer (Joint ASTM-API)

D95-13(2018) Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation 

D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020) 

D287-12b(2019) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) 

D4807-05(2020) Standard Test Method for Sediment in Crude Oil by Membrane Filtration 

D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) 

D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method 

D4007-11(2016)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) 

D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products 

D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration 

D4006-16e1 Standard Test Method for Water in Crude Oil by Distillation 

D1744-13 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) 

D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1 

D7829-13(2018) Standard Guide for Sediment and Water Determination in Crude Oil 

D2962-10(2019) Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches 

D5842-19 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement 

D6822-12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method 

D4057-22 Standard Practice for Manual Sampling of Petroleum and Petroleum Products 

D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method 

D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer 

D8009-22 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products 

D4177-22 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products 

Hydrocarbons for Chemical and Special Uses

D2712-20 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography 

D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers 

In-Service Lubricant Viscosity Testing Practices and Techniques

D8185-18 Standard Guide for In-Service Lubricant Viscosity Measurement 

In-Service Lubricants Particle Counting Practices and Techniques

D7647-10(2018) Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction 

D8072-17 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation

Industrial Lubricants and Engineering Sciences of High Performance Fluids and Solids

D8316-20a Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine 

Integrated Testers, Instrumentation Techniques for In-Service Lubricants

D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter) 

D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester 

D7416-09(2020) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Vis 

D7917-14(2018) Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications 

D7918-17a Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation 

D7685-11(2022) Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings 

Jet Fuel Specifications

D6824-13(2018) Standard Test Method for Determining Filterability of Aviation Turbine Fuel 

D7223-21 Standard Specification for Aviation Certification Turbine Fuel 

D1655-22 Standard Specification for Aviation Turbine Fuels 

D6615-22 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel 

D7872-13(2022) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels 

Liquefied Petroleum Gas

D2421-21e1 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis 

D8094-21 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer 

D2598-21 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis 

D1837-17 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases (Withdrawn 2017) 

D2597-10 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography (Withdrawn 2016) 

D2158-21 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases 

D7828-12 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021) 

 

D2713-20 Standard Test Method for Dryness of Propane (Valve Freeze Method) 

D7756-19 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection 

D2420-13(2018) Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) 

D1838-21 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases 

D1267-18 Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) 

D1265-11(2017)e1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method 

D7995-19 Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration 

D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) 

D5305-18e1 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor 

D7901-20 Standard Specification for Dimethyl Ether for Fuel Purposes 

D3700-21 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder 

D1835-22 Standard Specification for Liquefied Petroleum (LP) Gases 

Liquid Chromatography

D7419-18 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection 

D7524-20 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method 

 

D7347-15 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography 

D6591-19 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection 

D2007-19 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method 

D1319-20a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption 

D6550-20 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography 

D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection 

D8305-19 Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography 

D2549-02(2017) Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography 

D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography 

D7591-12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography 

D2001-07(2017) Standard Test Method for Depentanization of Gasoline and Naphthas 

D5186-22 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography 

Lubricating Grease

D7420-18 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine 

D4693-07(2021) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings 

 

Manufactured Carbon and Graphite Products

D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio 

D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature 

D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES) 

C695-21 Standard Test Method for Compressive Strength of Carbon and Graphite 

C611-21 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature 

D8091-21 Standard Guide for Impregnation of Graphite with Molten Salt 

D8377-21a Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt 

C886-21 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials 

D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature 

C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance 

C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles 

C562-15 Standard Test Method for Moisture in a Graphite Sample 

C561-16 Standard Test Method for Ash in a Graphite Sample 

D7219-19 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites 

C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature 

C709-09 Standard Terminology Relating to Manufactured Carbon and Graphite (Withdrawn 2017) 

C838-16 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes 

C816-15(2020)e1 Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method 

D8289-20 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite 

C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite 

C560-20 Standard Test Methods for Chemical Analysis of Graphite 

D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements 

C769-15(2020)e1 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus 

C748-20 Standard Test Method for Rockwell Hardness of Graphite Materials 

D8093-19 Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite 

D8255-19 Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens 

C781-20 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components 

C714-17 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method 

C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite 

C1039-85(2020)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes 

C783-85(2020) Standard Practice for Core Sampling of Graphite Electrodes 

C625-15(2021) Standard Practice for Reporting Irradiation Results on Graphite 

C808-75(2021) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials 

C565-15(2021) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials 

D8075-16(2021) Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite 

C662-16(2021) Standard Specification for Impervious Graphite Pipe and Threading 

C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air 

D7301-21 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose 

D7542-21 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime 

D7775-21 Standard Guide for Measurements on Small Graphite Specimens 

D7846-21 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

Mass Spectrometry

D2425-21 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry 

D2786-91(2016) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry 

D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry 

D3239-91(2016) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry 

D8276-19 Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry 

D7845-20 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry 

D2789-95(2016) Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry 

D5769-22 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry 

Metal Deformation Fluids and Lubricants

D3342-90(2017) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water 

D4042-93(2019) Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils 

Metal Removal Fluids and Lubricants

D3705-14(2019) Standard Test Method for Misting Properties of Lubricating Fluids 

D2711-17 Standard Test Method for Demulsibility Characteristics of Lubricating Oils 

D3601-88(2007) Standard Test Method for Foam In Aqueous Media (Bottle Test) (Withdrawn 2013) 

D6553-00(2016) Standard Test Method for Coolant Compatibility of Way Lubricants 

D8288-19 Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine 

D6203-17 Standard Test Method for Thermal Stability of Way Lubricants 

D5619-00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine (Withdrawn 2016) 

D1662-19 Standard Test Method for Active Sulfur in Cutting Oils 

D3519-88(2007) Standard Test Method for Foam in Aqueous Media (Blender Test) (Withdrawn 2013) 

D2881-19 Standard Classification for Metalworking Fluids and Related Materials 

D4627-22 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids 

Miscellaneous Asphalt Tests

D3143-98 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus (Withdrawn 2007) 

D6608-20 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes 

D7553-15(2021) Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide 

D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method) 

D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method) 

D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions 

D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method 

D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube) 

D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge (Withdrawn 2017) 

D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus 

D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester 

D8189-19 Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR) 

D3279-19 Standard Test Method for  n-Heptane Insolubles 

D8078-18e1 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues 

D6703-19 Standard Test Method for Automated Heithaus Titrimetry 

D7173-20 Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt 

D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene 

Newtonian Viscosity

D8092-17 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer 

Non-Lubricating Process Fluids

D5372-20 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids 

D6743-20 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids 

D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) 

D6666-20 Standard Guide for Evaluation of Aqueous Polymer Quenchants 

D3520-88(1998) Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) (Withdrawn 2008) 

D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis 

D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis 

D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) 

D6710-21 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil 

D8046-21 Standard Guide for Pumpability of Heat Transfer Fluids 

D7665-22 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids 

D7863-22 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids 

Oxidation of Greases